pt01

PT01 room thermostat

PT01 is a simple electronic room thermostat for manual regulation of infrared heating panels. It supports automatic temperature reduction at night.

The benefits of PT01:

  • Full replacement of bimetallic thermostats
  • Simple operation
  • Easy wall-mounting
  • Desired temperature control with the hysteresis of 0.3 °C
  • Desired temperature can be set in the range of 11–29 °C at 0.5 °C steps
  • Frost protection mode 3 °C
  • Automatic night temperature reduction – the preset temperature is reduced for 8 hours, the cycle is repeated every day at the same time
  • Relay “on” indication
  • Low battery indication
More
514 Kč

pcs

PT22 room thermostat

PT22 is a digital room thermostat with a backlit display for automatic regulation of infrared heating panels.

It allows quickly changing the desired temperature by simply turning a knob and it allows to set up a weekly temperature plan with up to 6 temperature changes per day.

The benefits of PT22:

  • Preset weekly temperature plan
  • 6 temperature changes per day
  • Programming in 10 minutes and 0.5 °C steps
  • Supports different program settings for individual days or parts of the week – Mon-Fri, Sat-Sun, Mon-Sun
  • Large and easy-to-read backlit graphic display
  • Intuitive navigation in the selected language (CZ/PL/EN/DE)
  • Supports HYSTERESIS settings
  • Manual mode (MANU)
  • Permanent off (OFF)
  • VACATION mode
  • Frost protection (3 °C)
  • Short-term temperature change
  • Installer self-test
  • Automatic change between DAYLIGHT SAVING / STANDARD time
  • Powered by 2 x 1.5V / AA alkaline batteries
  • Low battery indication
  • Output (potential free contact) max. 5A / 250V AC
More
pt22
1.410 Kč

pcs

Regulus TP39

TP39 LCD thermostat

Electronic thermostat with a digital thermometer.

The temperature is set by turning the adjusting knob (5) with an indicative scale (4). During the temperature setup, the display shows the temperature value (2) and a hand symbol on the left (1). After the setting (up to 10 sec.), the display will show the actual room temperature and the hand symbol will disappear.

The thermostat is electronic and measures the temperature every two minutes, so after a change of settings (the request to turn the heater off or on), the switching will occur within two minutes.

The thermostat status is indicated by a thermometer symbol (3). If the thermostat is switched on (the “heater is on”), a flashing thermometer symbol is shown.

The thermostat is designed exclusively for interior use. It should be mounted on an indoor wall about 1.5 m above floor level in a location subject to changes in the overall room temperature due to freely circulating air.

More
629 Kč

pcs

TP08 programmable thermostat

A programmable thermostat to control heating or air conditioning systems.

During operation it displays the actual temperature in the room, time and day of the week, the selected program, a graphical indication of the program, output state (ON – OFF), temperature selection outside the program settings and the selected temperature (economy – comfort).

It lets you select from eight preset programs (0–6 and 8), and/or set eight user programs (10–16 and 18). You can set two temperature values (economy and comfort) in the range from 5 °C to 35 °C. Program No. 8 is a frost protection mode; it turns the heater on when the temperature drops below 5 °C, alternately displaying the measured temperature and the dF symbol (defrost) on the screen.

The thermostat is designed exclusively for interior use. It should be mounted on an indoor wall about 1.5 m above floor level in a location subject to changes in the overall room temperature due to freely circulating air.

More
Regulus TP08
811 Kč

pcs

Regulus TZ33

TZ 33 plug-in thermostat

It is suitable for switching single-phase electric heating devices with a max. load of 16A.

The thermostat switches the heating device on and off depending on the desired and actual room temperature (heating to a selected temperature in the range of 5–35 °C).

Easy setup using a control dial.

The LCD display indicates the ambient temperature.

Switching on is signalled by a flashing thermometer symbol on the display and a green LED.

More
714 Kč

pcs

BPT710 wireless thermostat

BPT710 is a wireless thermostat (transmitter) which controls the BPT001, BPT002 or BPT003 receiving units switching on the connected heating devices according to the desired temperature.

BPT710 is capable of controlling up to 9 switching elements (receivers). It switches the elements sequentially to prevent current surges in the power mains. The operating range in buildings is min. 35 m – depending on the receiver used.

Compatible with the BPT001, BPT002, and BPT003 receivers.

7 weekly programs with 6 temperature changes per day.

Benefits of the BT710 wireless thermostat:

  • Backlit display
  • Modes: AUTO/MANU/OFF/VACATION
  • Rapid change of the preset temperature
  • Supports different program settings for individual days or parts of the week – Mon-Fri, Sat-Sun, Mon-Sun
  • Information about the number of hours of operation
  • Child lock – key lock
  • Automatic change between DAYLIGHT SAVING / STANDARD time
  • “OPENED WINDOW” function (heating auto-off during ventilation)
  • Current temperature correction setting
  • Frost protection (3 °C)

 

More
Bpt710
956 Kč

pcs

bpt010

BPT010 wireless thermostat

BPT010 is a simple wireless thermostat capable of controlling one switching element (receiver).

The operating range in buildings is min. 35 m – depending on the receiver used.

Compatible with the BPT001, BPT002, and BPT003 receivers.

The benefits of BPT010:

  • Rapid change of the desired temperature by a knob controller
  • Night temperature reduction – a button for quick selection of the night mode (automatic temperature drop by 3 °C for 8 hours)
  • Frost protection (3 °C)
More
799 Kč

pcs

BPT001 wireless receiver

BPT001 is designed for switching a heating device fitted with the BPT010 or BPT710 thermostats.

Its great advantage is its mounting directly in the installation box.

It is suitable for switching heating panels, direct heaters, heat radiant panels, heating mats, etc.

More
Bpt001
956 Kč

pcs

Bpt002

Wall-mounted BPT002 wireless receiver

BPT002 is designed for switching a heating device fitted with the BPT710 thermostat.

It is suitable for switching heating panels, direct heaters, heat radiant panels, heating mats, etc.

More
956 Kč

pcs

Plug-in BPT003 wireless receiver

BPT003 is designed for switching a heating device fitted with the BPT710 thermostat.

 

More
Bpt003
956 Kč

pcs

image1

PH-CJ37-BT central unit with a bluetooth module

A central unit with a Bluetooth module for controlling other control units (thermostats) regulating infrared panels within a single heating zone. The unit can be controlled through a smartphone app.

The CU sends information about the desired temperature to the individual elements (thermostats). Based on this information, each of the elements then controls the heating device (infrared panel) to which it is connected.

  • Includes a Bluetooth module for control via smartphones
  • Obtains heating requirements from individual rooms and turns the heating panels on/off accordingly
  • Provides two-way communication between the elements
  • Identifies the current statuses of activated elements within the system
  • 22 weekly programs, adjustable using PC, a smartphone app or WiFi
    • A GST1/GST2 module for control via SMS
    • A WiFi module for control over the Interne
More
4.598 Kč

pcs

PH-CJ37-GST central unit with GSM

A central unit with GSM (control via SMS) for controlling other control units (thermostats) regulating infrared panels within a single heating zone. The unit can be controlled through a smartphone app.

The CU sends information about the desired temperature to the individual elements (thermostats). Based on this information, each of the elements then controls the heating device (infrared panel) to which it is connected.

  • Choice of the type of central unit: -PH, +PH, – PH OT(OpenTherm), + PH OT(OpenTherm)
  • Controllable via Bluetooth through a smartphone app in the same room
  • Controllable via SMS (a GSM module inside the unit)
  • Controllable via a PC (the software is included)
  • Option to connect an Ethernet/WiFi module and control over the Internet
  • Option to expand the operating range using a repeater
  • Ability to control up to 255 PocketHome elements with different functions
  • 22 weekly temperature programs (optional), with the OpenTherm version including also a program for controlling domestic hot water heating
  • Vacation mode
  • Summer mode
  • Information about connected devices
  • Automatic switch-over from/to the daylight-saving time
  • E-EPROM memory for unlimited data retention
More
ph-cj37-gst
5.808 Kč

pcs

napajeci-zdroj-5v

Power supply unit

It is used to power the central unit of the PocketHome system.

More
500 Kč

pcs

PRE030 Ethernet/WiFi interface controller

It is used to connect the PocketHome PH-CJ37 BT central unit and the PT41 thermostat to an Ethernet or WiFi network. The connected device can thus be controlled from any computer in the network or from anywhere in the world over the Internet.

Requirements for using the PRE30:

  • Installed software for module control and settings (CD included)
  • Microsoft libraries NET Framework version 3.5.1 or higher
  • Installed device drivers (CD included)
  • An IP address and Internet connection over Ethernet or WiFi interface (a modem or router, when using multiple devices) at the location of the central unit
  • Power supply unit (included)
More
prevodnik-na-ethernet-pre30
3.872 Kč

pcs

ph-sw-pc

PocketHome for PC

Software for simple programming and controlling of the entire PocketHome system using a computer (PC).

It is used for quick and visual control over all the elements of the PocketHome® system. It allows setting constants and temperature programs, viewing temperature charts and current status information for individual elements and making adjustments, if needed. The software is part of the PH-CJ37-BT or the PH-CJ37-GST central unit.

More
Free!

pcs

PocketHome pro Android

This app allows you to conveniently control of the central unit of the PocketHome system via your mobile device.

The app makes configuration and administration of the elements of your heating system simple and easy:

  • Adding and pairing of new elements with the central unit
  • Overview of the elements within the household, optional sorting and filtering
  • Monitoring of current values (such as the current temperature) on each end device
  • Quick management of heating programs, you can set up the required waveforms using just touches and gestures
Android Android App available for free at GooglePlay
More
ph-android
Free!

pcs

ph-ios

PocketHome pro IOS

This app allows comfortable control of the PocketHome systemcentral unit  via your mobile device.

The app makes configuration and administration of the elements of your heating system simple and easy:

  • Adding and pairing of new elements with the central unit
  • Overview of the elements within the household, optional sorting and filtering
  • Monitoring of current values (such as the current temperature) on each end device
  • Quick management of heating programs, you can set up the required waveforms using just touches and gestures

 

Apple Topic

IOS app available for free at iTunes

More
Free!

pcs

PH-ET7-V wireless thermostat

The PH ET7-V wireless thermostat can control up to 9 switches (receivers, such as PH-SP1, PH-SP2, PH-SP3). It switches the elements sequentially to prevent current surges in the power mains.

The benefits of PH-ET7-V:

  • Supports integration into the PocketHome® system
  • The transmitter monitors the current room temperature and receives information about the desired temperature from the central unit
  • Based on the obtained information, the transmitter wirelessly controls the receiver
  • It sends confirmation of the changes made back to the central unit of the PocketHome® system
  • It can also operate in an autonomous mode
  • The E-EPROM memory retains data even in case of power outage
More
ph-bezdrat-termostat-et7
1.004 Kč

pcs

ph-sp1-prijimac

PH-SP1 receiver

Wireless switching unit – under the on/off switch.

It is used for switching infrared heaters.

Its great advantage is that it is mounted directly in the installation box.

More
1.316 Kč

pcs

PH-SP2 wall-mounted receiver

Wireless switching unit – wall-mounted. It is used for switching infrared heaters.

More
ph-sp2-prijimac
1.316 Kč

pcs

ph-sp3-prijimac

PH-SP3 plug-in receiver

Wireless switching unit – plug-in. It is used for switching infrared heaters.

More
1.316 Kč

pcs

PH-TS20 thermo-switch socket

The PH-TS20 wireless thermo-switch socket switches the connected infrared panel on/off based on the difference between the current and desired temperature.

The socket may operate autonomously (according to an internal custom-set program) or in wireless mode, when controlled by a PocketHome central unit.

It monitors the current temperature via an internal sensor and switches the connected infrared panel on/off based on the difference between the current and desired temperature.

More
zasuvka-ph-ts-20
998 Kč

pcs

termostat-k-td

PT712-EI thermostat for heat mats

PT712-EI is a digital thermostat with a spacial sensor regulating the surface temperature of a heat mat.

PT712-EI functions:

  • 2 weekly programs with 6 temperature changes per day
  • Supports HYSTERESIS settings
  • Setting of minimum ON time for the heat mat
  • Setting of maximum temperature limit for the heat mat
  • Rapid change of the preset temperature
  • Power failure backup for more than 100 hours of operation (NiMH rechargeable batteries)
More
1.440 Kč

pcs

PT41-S digital thermostat with thermistors

A digital thermostat for infrared heaters (DIN rail mounted).

PT41-S characteristics:

  • System control via the Internet
  • Connection of temperature sensors or room thermostats
  • Zone prioritization
  • Temperature correction
  • Supports PC/unit or unit/PC synchronization

Each PT41-S unit is able to regulate temperature in 8 other rooms (zones).

PT41-S functions:

  • It regulates up to 8 zones according to a program from PT41-CJ (or PC)
  • Each state change is indicated by a LED on the front panel
  • It is expandable by additional units (PT41-M or PT41-S for multiple zones)

Additional equipment required:

  • AD 05-DIN power supply unit
  • PRE-RS232/USB converter (including PC software – Free)
More
pt41s
3.509 Kč

pcs

napajeci-zdroj-pro-pt41s

Power supply unit for PT41-S

It is used to power the PT41-S units; its advantage is simple DIN-rail mounting.

More
787 Kč

pcs

Converter to connect PT41-S to PC

The USB RS232/RJ 11 converter is used for simple connection of new PT41-M(S) units to a computer. The package includes software for controlling PT41 units (FREE).

More
prevodnik-k-pt41s
1.198 Kč

pcs

SUNFLEX Roof In Plus Cervena

Sunflex Roof-in reflective foil

The foil is applied above plasterboard, lumber and mineral fibre ceilings, partition walls or skin walls. Application – for standard constructions and renovations, low-energy, passive and wooden houses.

When using Sunflex Roof-in in combination with infrared heating, the heating bill can be reduced by up to 20% and the room temperature increased by 2–4 °C. The investment pays back already during the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

The SUNFLEX® Roof-In Plus foil combines the properties of thermal insulation, moisture stop (vapour-proof foil) and heat reflection (thermoreflection). Because of this unique combination, SUNFLEX® Roof-In Plus significantly reduces heating costs.

The moisture stop of the SUNFLEX® Roof-In Plus foil is made of a unique multi-tiered bubble wrap laminated with reflective metallic layer. This metallic layer, sealed between two thin foils for long life, reflects up to 95% of thermal radiation back to the heated space.

The SUNFLEX® Roof-In Plus foil, along with an air gap between the foil and the inner cladding, acts as additional insulation providing the same thermal resistance as 6 cm of mineral wool (thermal resistance of a layer with a 3cm air gap is 1.1 m2 k/W).

Use of the SUNFLEX® Roof-In Plus foil also eliminates thermal bridging through rafters.

Packing: 1 × 50 m roll – 50 m2

More
3.207 Kč

pcs

Sunflex Floor Plus reflective foil

The foil is applied into the base plate. It reflects approx. 95% of the radiant infrared heat which would otherwise get lost in the foundations of the building. The heating bill savings can reach up to 19%. The investment pays back already during the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

Heat from the underfloor heating system propagates not only upwards to the heated space, but also downwards to the floor, which results in heat loss. The unwanted heating of the space under the hot-water pipes (or pad) is reduced by the SUNFLEX® Floor Plus underlying foil that reflects thermal rays back to the heated space.

The SUNFLEX® Floor Plus foil increases the thermal efficiency of underfloor heating by up to 8% and reduces the floor heat loss by up to 18%. In addition, it improves heat conduction upwards and to the sides, thus helping achieve uniform temperature across the floor.

The SUNFLEX® Floor Plus foil is also used as an expansion pad for insulation of water and heating piping or for insulation of air conditioning ducts. It can also be used as a reflective panel behind a radiator.

Packing: 1 × 50 m roll – 50 m2

More
SUNFLEX Floor Plus Modra
4.538 Kč

pcs

Mg 1990

Sunflex Foam reflective foil

The foil is applied under floating floors, wooden floors and carpets.

In combination with infrared heating significant savings on operating costs can be achieved and the investment pays back already in the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

The SUNFLEX® Foam foil is manufactured by laminating foam polyethylene.

This foil is ideal for levelling uneven base surfaces of floating floors, slabs or strips of hardwood. In addition, its reflective layer prevents floor heat loss, reflecting it back to the heated space.

The SUNFLEX® Foam foil significantly reduces heat loss. The thermoreflective properties of the foil can also be used when installing the foil behind radiators or insulating pipes.

Packing: 1 × 50 m roll – 50 m2

More
3.207 Kč

pcs

Cover strip

Cover strip for the power cord of a heat mat.

Available at a length of 1 m.

More
DSC 0077
182 Kč

pcs

hlinikova-paska

Aluminium foil tape

Aluminium foil tape is used for joining separate belts of vapour-proof and diffusion foils, such as Sunflex, and creating continuous reflective surfaces.

The joint shows very good strength and long life.

The foil tape isolates against both cold and heat. Its temperature resistance is very high – it has no problem coping with temperatures up to +140 °C and in the short term it can withstand temperatures of even up to +180 °C. It is also suitable for wrapping insulation materials made of aluminium-coated mineral fibres, especially in places where the joint is exposed to shear forces.

More
301 Kč

pcs

Installation instructions in PDF ?

Contact us

+420 381 239 027

SAKUTUS CZ, a.s.
Dražice 256,
391 31 Dražice
Czech Republic

info@sakutus.cz

Get navigations

Show on the map

Office hours:
Monday – Friday 6.30-15.00