SUNFLEX Roof In Plus Cervena

Sunflex Roof-in reflective foil

The foil is applied above plasterboard, lumber and mineral fibre ceilings, partition walls or skin walls. Application – for standard constructions and renovations, low-energy, passive and wooden houses.

When using Sunflex Roof-in in combination with infrared heating, the heating bill can be reduced by up to 20% and the room temperature increased by 2–4 °C. The investment pays back already during the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

The SUNFLEX® Roof-In Plus foil combines the properties of thermal insulation, moisture stop (vapour-proof foil) and heat reflection (thermoreflection). Because of this unique combination, SUNFLEX® Roof-In Plus significantly reduces heating costs.

The moisture stop of the SUNFLEX® Roof-In Plus foil is made of a unique multi-tiered bubble wrap laminated with reflective metallic layer. This metallic layer, sealed between two thin foils for long life, reflects up to 95% of thermal radiation back to the heated space.

The SUNFLEX® Roof-In Plus foil, along with an air gap between the foil and the inner cladding, acts as additional insulation providing the same thermal resistance as 6 cm of mineral wool (thermal resistance of a layer with a 3cm air gap is 1.1 m2 k/W).

Use of the SUNFLEX® Roof-In Plus foil also eliminates thermal bridging through rafters.

Packing: 1 × 50 m roll – 50 m2

More
3.207 Kč

pcs

Sunflex Floor Plus reflective foil

The foil is applied into the base plate. It reflects approx. 95% of the radiant infrared heat which would otherwise get lost in the foundations of the building. The heating bill savings can reach up to 19%. The investment pays back already during the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

Heat from the underfloor heating system propagates not only upwards to the heated space, but also downwards to the floor, which results in heat loss. The unwanted heating of the space under the hot-water pipes (or pad) is reduced by the SUNFLEX® Floor Plus underlying foil that reflects thermal rays back to the heated space.

The SUNFLEX® Floor Plus foil increases the thermal efficiency of underfloor heating by up to 8% and reduces the floor heat loss by up to 18%. In addition, it improves heat conduction upwards and to the sides, thus helping achieve uniform temperature across the floor.

The SUNFLEX® Floor Plus foil is also used as an expansion pad for insulation of water and heating piping or for insulation of air conditioning ducts. It can also be used as a reflective panel behind a radiator.

Packing: 1 × 50 m roll – 50 m2

More
SUNFLEX Floor Plus Modra
4.538 Kč

pcs

Mg 1990

Sunflex Foam reflective foil

The foil is applied under floating floors, wooden floors and carpets.

In combination with infrared heating significant savings on operating costs can be achieved and the investment pays back already in the first heating season.

Thanks to the velocity of infrared rays, which comes close to the speed of light, the infrared heat can penetrate common types of insulation, such as mineral wool, polystyrene or polyurethane. The only way to keep up to 95% of the heat in the heated space is to reflect it from a metallized layer on a reflective foil back into the room. With a reflective foil, significant heat losses can be prevented.

The SUNFLEX® Foam foil is manufactured by laminating foam polyethylene.

This foil is ideal for levelling uneven base surfaces of floating floors, slabs or strips of hardwood. In addition, its reflective layer prevents floor heat loss, reflecting it back to the heated space.

The SUNFLEX® Foam foil significantly reduces heat loss. The thermoreflective properties of the foil can also be used when installing the foil behind radiators or insulating pipes.

Packing: 1 × 50 m roll – 50 m2

More
3.207 Kč

pcs

Aluminium foil tape

Aluminium foil tape is used for joining separate belts of vapour-proof and diffusion foils, such as Sunflex, and creating continuous reflective surfaces.

The joint shows very good strength and long life.

The foil tape isolates against both cold and heat. Its temperature resistance is very high – it has no problem coping with temperatures up to +140 °C and in the short term it can withstand temperatures of even up to +180 °C. It is also suitable for wrapping insulation materials made of aluminium-coated mineral fibres, especially in places where the joint is exposed to shear forces.

More
hlinikova-paska
301 Kč

pcs

Installation instructions in PDF ?

Contact us

+420 381 239 027

SAKUTUS CZ, a.s.
Dražice 256,
391 31 Dražice
Czech Republic

info@sakutus.cz

Get navigations

Show on the map

Office hours:
Monday – Friday 6.30-15.00