DSC 0029

TD 230 heat mat

The TD 230 heat mat is intended for heating animal beds.

The TD 230 heat mat features a polyester-coated NOMATERM II heating unit reinforced with a glass mat.

The heat mat has a 3m long 2 × 0.75 cable. Upon request, the pad can be delivered with a cable of different length.

The product is classified as a Class II appliance with IP 67 protection.

The heat mat is 8 mm thick and has no insulation.

Upon request, the panel can also be adapted for 24V or manufactured in a different size.

More

pcs

Insulated TD 230 heat mat

The insulated TD 230 heat mat features an integrated NOMATERM II heating unit.

The heating unit is polyester-coated, reinforced with a glass fabric mat, and its back is insulated.

The thickness of the heat pad is 18 mm.

The heat mat has a 3m long 2 × 0.75 cable and an opening for installing a temperature sensor. Upon request, the mat can be delivered with a cable of different length.

More
DSC 0062

pcs

DSC 0042

Grid-mounted TD 230 heat mat

The grid-mounted heat mat is designed to be mounted on grid frames. The grid-mounted mat has a cable outlet on the bottom side and cannot be therefore placed directly on flat floor.

The grid-mounted TD 230 heat mat features an integrated NOMATERM II heating unit.

The heating unit is polyester-coated, reinforced with a glass fabric mat, and its back is insulated with polyurethane. It has an opening for installing a temperature sensor.

The heat mat has a 3m long 2 × 0.75 cable. Upon request, the mat can be delivered with a cable of different length.

More

pcs

Hot-water heat mat

The hot-water heat mat is made of POLYLITE 415-041 resin filled with sand and chopped glass fibre.

Water is distributed throughout the panel using 10 mm copper pipes covered with reflective foil insulation on the rear side.

There are two outlets fitted with DN 20 3/4 brass sleeve pieces for the connection of hot water pipes on the bottom of the mat.

More
DSC 0054

pcs

Ecora Tps

Ecora TPS

The NOMATERM+ heating unit is embedded in a spruce wood frame and its back is covered with insulation material and aluminium foil. The panel has a cable for connecting to an electrical box.

The TPS-type panel with a wooden frame is a Class II electrical appliance. TPS heating panels are mounted directly to the ceiling using screws and wall plugs.

The default colour of the wooden frame is white or transparent (or the frame can be left unpainted). Based on the customer’s wish, the spruce frame can be tinted to any RAL colour using a water soluble paint.

Other applications

  • heating of infrared saunas
  • heating of church pews
  • creating warm zones in large buildings
More

Choose option

1.936 Kč5.566 Kč
Příkon 150 W 200 W 300 W 380 W 500 W 650 W 80 W
Rozměr (mm) 1240 x 640 x 40 440 x 260 x 40 540 x 540 x 40 640 x 640 x 40 840 x 260 x 40 900 x 540 x 40 980 x 640 x 40
Barva rámu ral transparent varnish white without lacquer
1.936 Kč5.566 Kč

pcs

Ecora TPS cassette

Ecora TPS cassette is a heating panel designed for mounting into cassette soffits with a pitch of 300 × 300 mm, where the panel is placed in the ceiling grid replacing a cassette panel.

On its back, the Nomaterm+ heating unit is reinforced with a wooden frame and covered with insulation material and aluminium foil.

The panel has a cable for connecting to an electrical box located above the grid.

ECORA TPS 300 K heating panel is a Class II electrical appliance.

 

More
Ecora Tps Kazetovy

pcs

DSC 0080

Ecora TPS AL

The NOMATERM+ heating unit is embedded in a J-shaped or L-shaped aluminium frame and its back is covered with insulation material and aluminium foil.  The panel has a cable for connecting to an electrical box. TPS AL panel is a Class I electrical appliance.

Frame shape:

  • The J-shaped frame is round when viewed from the front
  • The L-shaped frame is square-shaped when viewed from the front

TPS AL panel with an L-shaped frame is suitable also for installation in plasterboard ceilings, where it can be mounted on ALU profiles prior to the final assembly of the ceiling ensuring that the panel is visually embedded into the plasterboard ceiling.

The panel assembly includes also a ceiling bracket made of zinc-coated sheet, which is fixed to the ceiling using screws and wall plugs. Connect the panel to the mains via a terminal block and attach it to the ceiling bracket using springs. There remains a gap of roughly 8 mm between the panel and the ceiling to facilitate panel removal and to compensate for uneven surface of the ceiling.

DSC 0034

 

More

pcs

ECORA TPS AL “T”

ECORA heating panel with an aluminium frame for mounting into plasterboard ceilings.

The NOMATERM+ heating unit is embedded in a T-shaped aluminium frame and its back is covered with insulation material and aluminium foil.

The panel has a cable for connecting to an electrical box.

TPS AL panel with a T-shaped frame is a Class I electrical appliance.

T-shaped aluminium frame colour: white.

 

More
ecora-tps-al-t

pcs

dsc_0102

Ecora+

ECORA+ infrared heating panels are designed for wall-mounted systems.

The NOMATERM+ heating unit is embedded in an aluminium frame and its back is covered with insulation material, aluminium foil and zinc-coated sheet metal. The ECORA+ heating panel is a class I appliance with IP44 protection rating.

The ECORA+ heating panel has a built-in thermostat to prevent overheating. A power cord is used to connect the panel to the mains.

ECORA+ is designed for tempering and heating rooms and bathrooms.

Never cover the panel. Any materials covering the panel may cause fire. Do not place any furniture or curtains in front of the panel and ensure free circulation of air.

More

pcs

OZIRIS AL

The OZIRIS heating panel is made up of the NOMATERM II heating unit and is embedded in an aluminium frame.

The OZIRIS heating panel is designed for heating of residential houses, offices and shops. It can be used for heating of box offices or church pews.

The OZIRIS heating panel set in an aluminium frame has a power input of 600W.

The size of the unit is 895×595×25 mm.

The panel is manufactured by FUJAS a SYN s.r.o.

More
OZS AL 096
3.908 Kč

pcs

Koupelnove Topne Panely Tpk

Bathroom Ecora TPK

The bathroom ECORA TPK heating panel contains a built-in NOMATERM+ heating unit.

The unit is embedded in an aluminium frame and its back is covered with insulation material and aluminium foil.

The bathroom heating panel with an aluminium frame is a Class I electrical appliance.

The heating panel has a built-in thermostat to prevent overheating.

The panel is connected to the mains by a coiled power cord.

Our bathroom heating panels are available in two versions:

 

  1.  TPK v – with a white UNISCHUKO curved fork and a switch TPK400v
  2. TPK r – with a special UNISCHUKO fork with an integrated indoor temperature controller, switch and digital diode  TPK 400r
More

pcs

NOMATERM+

The NOMATERM+ heating unit is manufactured in various sizes and input power ratings.

When choosing a particular size of the NOMATERM+ heating unit, it is necessary to specify the required power input within the range specified for each size.

Potential applications of the NOMATERM+ heating unit

  • heating units for infrared panels, also suitable for infrared saunas
  • heating units for heating animal beds (heating pads)
  • heating of feeding troughs (to prevent freezing of water)
More
Nomaterm 02

pcs

OZS PII 096

OZIRIS Industrial

The OZIRIS Industrial heating panel is made up of the NOMATERM II heating unit and is embedded in a sheet-metal frame. It is mainly used for heating industrial, manufacturing and storage halls.

IP 54 protection enables the panel to be used in dusty and humid environments.

The panel is manufactured by FUJAS a SYN s.r.o.

More

pcs

Installation instructions in PDF ?

Contact us

+420 381 239 027

SAKUTUS CZ, a.s.
Dražice 256,
391 31 Dražice
Czech Republic

info@sakutus.cz

Get navigations

Show on the map

Office hours:
Monday – Friday 6.30-15.00