Infrared heating

Ecora infrared panels with a built-in NOMATERM+ heating unit are designed for ceiling-mounted heating systems for residential, industrial, commercial and social premises. When mounted on a wall, the panel must be placed at least 1,8 m above the floor.

  • Ecora panels are available at power input ratings of 10 W/dm2 (93 W/sq ft) of heat radiation surface and they are available in derived options depending on technical specifications of the NOMATERM+ heating unit.
  • Ecora heating panels feature a built-in NOMATERM+ heating unit with silica sand surface coating and white paint coating.
  • Ecora heating panels are designed for maximum surface temperature of 120 °C. Identical units are manufactured for either DC or AC current and rated voltage of 230 V.
  •  The wiring installation of the panel must be performed by a qualified person only.
  • Ecora panels are easy to maintain and require only vacuum cleaning of the surface or wiping with a damp sponge. When performing any maintenance, the infrared panel must be disconnected from the electrical mains and must be cold. All repairs must be carried out exclusively by the manufacturer.
  • ECORA panels are manufactured in several designs according to the type of the frame used.

Do you have questions? Call +420 733 517 075

En Ecora
Slunecni Ohrev The principle of
solar
heating

 

Ecora Tps

Ecora TPS

The NOMATERM+ heating unit is embedded in a spruce wood frame and its back is covered with insulation material and aluminium foil. The panel has a cable for connecting to an electrical box.

The TPS-type panel with a wooden frame is a Class II electrical appliance. TPS heating panels are mounted directly to the ceiling using screws and wall plugs.

The default colour of the wooden frame is white or transparent (or the frame can be left unpainted). Based on the customer’s wish, the spruce frame can be tinted to any RAL colour using a water soluble paint.

Other applications

  • heating of infrared saunas
  • heating of church pews
  • creating warm zones in large buildings
More

Choose option

1.936 Kč5.566 Kč
Příkon 150 W 200 W 300 W 380 W 500 W 650 W 80 W
Rozměr (mm) 1240 x 640 x 40 440 x 260 x 40 540 x 540 x 40 640 x 640 x 40 840 x 260 x 40 900 x 540 x 40 980 x 640 x 40
Barva rámu ral transparent varnish white without lacquer
1.936 Kč5.566 Kč

pcs

Ecora TPS cassette

Ecora TPS cassette is a heating panel designed for mounting into cassette soffits with a pitch of 300 × 300 mm, where the panel is placed in the ceiling grid replacing a cassette panel.

On its back, the Nomaterm+ heating unit is reinforced with a wooden frame and covered with insulation material and aluminium foil.

The panel has a cable for connecting to an electrical box located above the grid.

ECORA TPS 300 K heating panel is a Class II electrical appliance.

 

More
Ecora Tps Kazetovy

pcs

DSC 0080

Ecora TPS AL

The NOMATERM+ heating unit is embedded in a J-shaped or L-shaped aluminium frame and its back is covered with insulation material and aluminium foil.  The panel has a cable for connecting to an electrical box. TPS AL panel is a Class I electrical appliance.

Frame shape:

  • The J-shaped frame is round when viewed from the front
  • The L-shaped frame is square-shaped when viewed from the front

TPS AL panel with an L-shaped frame is suitable also for installation in plasterboard ceilings, where it can be mounted on ALU profiles prior to the final assembly of the ceiling ensuring that the panel is visually embedded into the plasterboard ceiling.

The panel assembly includes also a ceiling bracket made of zinc-coated sheet, which is fixed to the ceiling using screws and wall plugs. Connect the panel to the mains via a terminal block and attach it to the ceiling bracket using springs. There remains a gap of roughly 8 mm between the panel and the ceiling to facilitate panel removal and to compensate for uneven surface of the ceiling.

DSC 0034

 

More

pcs

ECORA TPS AL “T”

ECORA heating panel with an aluminium frame for mounting into plasterboard ceilings.

The NOMATERM+ heating unit is embedded in a T-shaped aluminium frame and its back is covered with insulation material and aluminium foil.

The panel has a cable for connecting to an electrical box.

TPS AL panel with a T-shaped frame is a Class I electrical appliance.

T-shaped aluminium frame colour: white.

 

More
ecora-tps-al-t

pcs

dsc_0102

Ecora+

ECORA+ infrared heating panels are designed for wall-mounted systems.

The NOMATERM+ heating unit is embedded in an aluminium frame and its back is covered with insulation material, aluminium foil and zinc-coated sheet metal. The ECORA+ heating panel is a class I appliance with IP44 protection rating.

The ECORA+ heating panel has a built-in thermostat to prevent overheating. A power cord is used to connect the panel to the mains.

ECORA+ is designed for tempering and heating rooms and bathrooms.

Never cover the panel. Any materials covering the panel may cause fire. Do not place any furniture or curtains in front of the panel and ensure free circulation of air.

More

pcs

OZIRIS AL

The OZIRIS heating panel is made up of the NOMATERM II heating unit and is embedded in an aluminium frame.

The OZIRIS heating panel is designed for heating of residential houses, offices and shops. It can be used for heating of box offices or church pews.

The OZIRIS heating panel set in an aluminium frame has a power input of 600W.

The size of the unit is 895×595×25 mm.

The panel is manufactured by FUJAS a SYN s.r.o.

More
OZS AL 096
3.908 Kč

pcs

Koupelnove Topne Panely Tpk

Bathroom Ecora TPK

The bathroom ECORA TPK heating panel contains a built-in NOMATERM+ heating unit.

The unit is embedded in an aluminium frame and its back is covered with insulation material and aluminium foil.

The bathroom heating panel with an aluminium frame is a Class I electrical appliance.

The heating panel has a built-in thermostat to prevent overheating.

The panel is connected to the mains by a coiled power cord.

Our bathroom heating panels are available in two versions:

 

  1.  TPK v – with a white UNISCHUKO curved fork and a switch TPK400v
  2. TPK r – with a special UNISCHUKO fork with an integrated indoor temperature controller, switch and digital diode  TPK 400r
More

pcs

OZIRIS Industrial

The OZIRIS Industrial heating panel is made up of the NOMATERM II heating unit and is embedded in a sheet-metal frame. It is mainly used for heating industrial, manufacturing and storage halls.

IP 54 protection enables the panel to be used in dusty and humid environments.

The panel is manufactured by FUJAS a SYN s.r.o.

More
OZS PII 096

pcs

Installation instructions in PDF ?

Contact us

+420 381 239 027

SAKUTUS CZ, a.s.
Dražice 256,
391 31 Dražice
Czech Republic

info@sakutus.cz

Get navigations

Show on the map

Office hours:
Monday – Friday 6.30-15.00