image1

PH-CJ37-BT central unit with a bluetooth module

A central unit with a Bluetooth module for controlling other control units (thermostats) regulating infrared panels within a single heating zone. The unit can be controlled through a smartphone app.

The CU sends information about the desired temperature to the individual elements (thermostats). Based on this information, each of the elements then controls the heating device (infrared panel) to which it is connected.

  • Includes a Bluetooth module for control via smartphones
  • Obtains heating requirements from individual rooms and turns the heating panels on/off accordingly
  • Provides two-way communication between the elements
  • Identifies the current statuses of activated elements within the system
  • 22 weekly programs, adjustable using PC, a smartphone app or WiFi
    • A GST1/GST2 module for control via SMS
    • A WiFi module for control over the Interne
More
4.598 Kč

pcs

PH-CJ37-GST central unit with GSM

A central unit with GSM (control via SMS) for controlling other control units (thermostats) regulating infrared panels within a single heating zone. The unit can be controlled through a smartphone app.

The CU sends information about the desired temperature to the individual elements (thermostats). Based on this information, each of the elements then controls the heating device (infrared panel) to which it is connected.

  • Choice of the type of central unit: -PH, +PH, – PH OT(OpenTherm), + PH OT(OpenTherm)
  • Controllable via Bluetooth through a smartphone app in the same room
  • Controllable via SMS (a GSM module inside the unit)
  • Controllable via a PC (the software is included)
  • Option to connect an Ethernet/WiFi module and control over the Internet
  • Option to expand the operating range using a repeater
  • Ability to control up to 255 PocketHome elements with different functions
  • 22 weekly temperature programs (optional), with the OpenTherm version including also a program for controlling domestic hot water heating
  • Vacation mode
  • Summer mode
  • Information about connected devices
  • Automatic switch-over from/to the daylight-saving time
  • E-EPROM memory for unlimited data retention
More
ph-cj37-gst
5.808 Kč

pcs

prevodnik-na-ethernet-pre30

PRE030 Ethernet/WiFi interface controller

It is used to connect the PocketHome PH-CJ37 BT central unit and the PT41 thermostat to an Ethernet or WiFi network. The connected device can thus be controlled from any computer in the network or from anywhere in the world over the Internet.

Requirements for using the PRE30:

  • Installed software for module control and settings (CD included)
  • Microsoft libraries NET Framework version 3.5.1 or higher
  • Installed device drivers (CD included)
  • An IP address and Internet connection over Ethernet or WiFi interface (a modem or router, when using multiple devices) at the location of the central unit
  • Power supply unit (included)
More
3.872 Kč

pcs

PH-SP2 wall-mounted receiver

Wireless switching unit – wall-mounted. It is used for switching infrared heaters.

More
ph-sp2-prijimac
1.316 Kč

pcs

pt41s

PT41-S digital thermostat with thermistors

A digital thermostat for infrared heaters (DIN rail mounted).

PT41-S characteristics:

  • System control via the Internet
  • Connection of temperature sensors or room thermostats
  • Zone prioritization
  • Temperature correction
  • Supports PC/unit or unit/PC synchronization

Each PT41-S unit is able to regulate temperature in 8 other rooms (zones).

PT41-S functions:

  • It regulates up to 8 zones according to a program from PT41-CJ (or PC)
  • Each state change is indicated by a LED on the front panel
  • It is expandable by additional units (PT41-M or PT41-S for multiple zones)

Additional equipment required:

  • AD 05-DIN power supply unit
  • PRE-RS232/USB converter (including PC software – Free)
More
3.509 Kč

pcs

Power supply unit for PT41-S

It is used to power the PT41-S units; its advantage is simple DIN-rail mounting.

More
napajeci-zdroj-pro-pt41s
787 Kč

pcs

prevodnik-k-pt41s

Converter to connect PT41-S to PC

The USB RS232/RJ 11 converter is used for simple connection of new PT41-M(S) units to a computer. The package includes software for controlling PT41 units (FREE).

More
1.198 Kč

pcs

Our network of partners

Contact our trained professionals. We will assist you with selecting the appropriate heating units as well as transportation, assembly and installation.

More information

Contact us

+420 381 239 027

SAKUTUS CZ, a.s.
Dražice 256,
391 31 Dražice
Czech Republic

info@sakutus.cz

Get navigations

Show on the map

Office hours:
Monday – Friday 6.30-15.00